![CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (1)](https://i0.wp.com/static.addtoany.com/buttons/share_save_171_16.png "CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (1)")
CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine
Latest N10-007 exam dumps for guaranteed pass
NEW QUESTION 141
A network technician installed a new host on the network. The host does not connect to the company's cloud servers. The technician tries to ping a server using the AP address without success. Checking the IP address using ipconfing shows:![CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (2)](https://i0.wp.com/www.dumpstillvalid.com/uploads/imgs/N10-007-5482f54dcd916265664cacffbd4a1640.jpg "CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (2)")
Which of the following should the technician perform NEXT to determine where the problem lies?
- A. Modify the ACL of the router to allow port 80 out of the network.
- B. Run a tracert command to locate where the packet is dropped.
- C. Change the DNS servers to be on the same subnet as the host.
- D. Modify the default gateway address and ping the server to test connectivity.
Answer: B.
NEW QUESTION 142
A systems analyst assistant reports the following findings from an investigation of slow Internet connections in a remote office to the senior systems analyst:![CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (3)](https://i0.wp.com/www.dumpstillvalid.com/uploads/imgs/N10-007-27731519ef61f4ba2a01f27d506bfb33.jpg "CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (3)")
Which of the following devices is causing the problem?
- A. Switch 1
- B. Interruptor 2
- firewall
- D router
Answer: C
NEW QUESTION 143
A company needs to implement a fault tolerant server configuration after the failure of its database server. The company decides to implement redundant load balancing servers. Which of the following should be used for file storage for servers?
- A. Cloud storage
- B. IDE
- C iSCSI
- D SAN
Answer to
NEW QUESTION 144
A network technician is troubleshooting a laptop that does not have wireless connectivity. The technician determines that the wireless network is working as expected. The laptop does not display any SSID or allow the technician to change the network settings. Which of the following should the technician check FIRST?
- A. Verify that your network drivers are up to date.
- B. Evaluate the location of the antenna.
- C. Confirm the WAP power levels.
- D. Check if there is excess capacity in the network.
- E. Make sure wireless is enabled on the laptop.
Answer: E
Explanation:
Explanation/Reference:
NEW QUESTION 145
A technician is configuring a firewall on the network that would display a public IP address on the Internet and assign private IP addresses to users within the network. Which of the following processes should be configured?
- A. LCA
- B. Port security
- c. MAC filtering
- D.NAT
Answer: D
NEW QUESTION 146
Which of the following is ENTIRELY based on the use of ICMP packets?
- A. Pitufo attack
- B. NMAP
- C. Buffer Overflow Attack
- D.Social engineering
Answer to
NEW QUESTION 147
A network technician has discovered a rogue access point under an empty cubicle desk.
Which of the following should the technician perform to ensure that another cannot be placed on the network?
- A. Disable unused ports on switches
- B. Configure WPA2 on all access points
- C. Use TACACS+ authentication
- D. Enable DHCP protection to detect rogue servers
Answer: D
NEW QUESTION 148
A junior network technician is working in the field and needs to connect to the company's remote server,
however, doing so will require the junior technician to use the public Internet. Because security is a
concern, which of the following is the BEST method to use?
- A. VNC
- B Telnet
- C. SFTP
- D SSH
Answer: D
NEW QUESTION 149
A network administrator needs to extend an organization's network to a nearby building that already has unused SMF installed. The network administrator has decided to create a switch-to-switch uplink. Which of the following standards would be the BEST to use?
- A. 1000BASE-LX
- B 10BASE-T
- C 100BASE-T
- D.1000BASE-SX
Answer: C
NEW QUESTION 150
Users in a school lab report slow connections to servers and the Internet. Other school users have no problem. The lab has 25 computers and is connected with a single 1 Gb Ethernet connection over Cat 5e cabling to an unmanaged switch. There are also three spare lengths of Cat 5e cable, not in use. The school wants to double the connection speed between the lab and the servers without installing new cables. Which of the following would be the BEST solution?
- A. Plug a second spare cable into each end to double the speed.
- B. Replace the switches with 10 Gb switches and use existing cabling.
- C. Connect a second cable and set one port to TX and one port to RX.
- D. Replace the switches with ones that use port bonding and use the spare cables.
Answer: D
Explanation:
Explanation
NEW QUESTION 151
An administrator is troubleshooting a user's intermittent wireless connectivity issue. Other users across the hall can connect and use the wireless network successfully. Upon inspection of the connection details, the administrator finds the following:![CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (4)](https://i0.wp.com/www.dumpstillvalid.com/uploads/imgs/N10-007-4f99c802330eaf28f94bb3463fda6b4c.jpg "CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (4)")
Which of the following is MOST likely to be the cause of the poor wireless connection?
- A. Latency
- B. Wrong type of antenna
- C. Overcapacity
- D. Channel overlap
Answer: B.
NEW QUESTION 152
A technician replaces a failed router with a spare one that has been in inventory for some time. After trying to enable HTTPS on the replacement router, the technician discovers that the feature is not available. The help desk was able to connect to the old router. Which of the following actions should the technician take to enable HTTPS access for the support team?
- A. Enable HTTP on the router
- B. Perform a factory reset on the router
- C. Update the firmware of the replacement router
- D. Reboot the router
Answer: C
NEW QUESTION 153
A small business requests a quote to upgrade its wireless network. The company currently operates 60 autonomous access points and has plans to increase wireless density by 50% in the near future.
The requirements state that the chosen solution should significantly reduce the management overhead of the current wireless network. Which of the following should suppliers recommend in response to the request for quotation?
- A. Using autonomous APs with a load balancer
- B. The use of lightweight access points with a wireless controller
- C. Using lightweight access points with a load balancer
- D. Using Standalone APs with a Wireless Controller
Answer: D
NEW QUESTION 154
A network technician receives the following command output from a Linux-based machine:![CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (5)](https://i0.wp.com/www.dumpstillvalid.com/uploads/imgs/N10-007-874e98403404c34564163c0e7475d336.jpg "CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (5)")
Which of the following commands did the network technician execute?
- A. dig -t ANY ABCDEG.com
- B. NMAP-t ABCDEG.com
- C. netstat-a ACDEG.com
- D.iptables -f ABCDEG.com
Answer: D
NEW QUESTION 155
Ann, a new employee within a department, cannot print to any of the department's printers or access any of the resources that others can. However, she can access the Internet. The network engineer has confirmed that Ann's has been configured the same as the others. There are no access lists that restrict Ann's access. Which of the following clouds is the problem of this lack of access?
- A. Problem with the DNS server
- B. DHCP server problem
- C. Blocked Spanning Tree Ports
- D. Speed/Duplex Mismatch
- E. VLAN Mismatch
Answer: E
NEW QUESTION 156
A network administrator wants to ensure that there are no unnecessary open communication paths on a server.
Using a port scanner, the administrator finds that the ports are reported as closed. Which of the following BEST explains this answer?
- A. The ports responded with a SYN/ACK response
- B. The ports belong to an active system and are denying requests
- C. Ports do not belong to a living system
- D. The ports are associated with deprecated services
Answer: D
NEW QUESTION 157
A network technician configures the ACL on a firewall to allow outbound traffic for various popular services, such as email and web browsing. However, after the implementation of the firewall, users are still unable to retrieve their emails. Which of the following would BEST solve this problem?
- A. Allow the firewall to accept incoming traffic to ports 25, 67, 179, and 3389
- B. Allow the firewall to accept incoming traffic to ports 21, 53, 69, and 123
- C. Configure the firewall to work in transparent mode
- D. Allow the firewall to accept incoming traffic to ports 80, 110, 143, and 443
Answer: D
NEW QUESTION 158
A network technician is troubleshooting a PC that cannot access the Internet. However, the PC responds to ICMP echo requests from the same subnet. Which of the following is the MOST likely reason the PC is unable to communicate externally?
- A. The virtual IP has not been configured.
- B. The PC has no IP reservation.
- C. The loopback address is being used.
- D. The default gateway is incorrect.
Answer: C
NEW QUESTION 159
Which of the following should a network administrator implement to control all preventative security measures?
- A. Firewall
- B. IDS
- C.UTM
- D.Attorney
Answer: C
NEW QUESTION 160
A network technician is reviewing the following output from a router:![CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (6)](https://i0.wp.com/www.dumpstillvalid.com/uploads/imgs/N10-007-3177dbd2c2ebfb7a4fe9a078b42eafae.jpg "CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (6)")
Which of the following is an example?
- A. A vulnerability scan
- B. A port scan
- C. A traffic log
- D. A packet capture
Answer: C
NEW QUESTION 161
You have been assigned the task of testing a CAT5e cable. A summary of the test results can be found on the screen.
Step 1 – Select the tool that was used to create the cable test results.
Step 2: Interpret the test results and select the option that explains the results. Once you are done with your analysis, click the 'Submit Cable Test Analysis' button.![CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (7)](https://i0.wp.com/www.dumpstillvalid.com/uploads/imgs/N10-007-2c5150a0e9c9331a37707d242592a084.jpg "CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (7)")
![CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (8)](https://i0.wp.com/www.dumpstillvalid.com/uploads/imgs/N10-007-10417f6a6ae92938c2eb5661c4fe38c5.jpg "CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (8)")
Answer:
Explanation:![CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (9)](https://i0.wp.com/www.dumpstillvalid.com/uploads/imgs/N10-007-34fc47e7664cf80b05bf269ad5d4f939.jpg "CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (9)")
Explanation![CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (10)](https://i0.wp.com/www.dumpstillvalid.com/uploads/imgs/N10-007-e3c3d98c06293feb9d7151f476534b4f.jpg "CompTIA N10-007 Exam Dumps - PDF Questions and Test Engine [Q141-Q166] (10)")
A cable certifier provides "pass" or "fail" information in accordance with industry standards, but can also display detailed information when a "failure" occurs. This includes shorts, the wire pairs involved, and the distance to the short. When a short is identified, along the entire length of the cable, it means that the cable has not been crimped correctly.
NEW QUESTION 162
Which of the following BEST describes the differences between VLAN hopping and session hijacking?
- A. VLAN hopping is a brute force attack executed to gain additional access. Session hijacking involves physically interrupting a network connection
- B. VLAN hopping involves dropping a user's network connection to execute malicious commands. Session hijacking involves compromising a host to elevate privileges
- C. VLAN hopping is the act of exploiting poor VLAN tagging. Session hijacking is a web-based attack aimed at privilege escalation
- D. VLAN hopping involves the unauthorized transition from one VLAN to another to gain additional access. Session hijacking involves breaking a user's web connection to execute commands
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 163
A technician is setting up a printer for a customer. The technician connects the printer to the network, but is not sure how to determine its switch port. Which of the following should the technician do FIRST to locate the switchport?
- A. Check the ARP table on the router.
- B. Set up an SSH session on the desktop.
- C. Configure port security on the switch.
- D. Perform a DNS lookup on the server.
Answer to
NEW QUESTION 164
A technician discovers that a malware infection has corrupted part of the Windows TCP/IP stack. Which of the following commands can help repair the damage?
- A. netsh interface
- B. netsh wlan
- C. netsh winsock
- D.netsh lan
Answer: C
NEW QUESTION 165
A customer moving to a new office wants the IP network to be configured to accommodate 412 network-connected devices that are all on the same subnet. The subnet should be as small as possible. Which of the following subnet masks should be used to achieve the required result?
- A. 255.255.255.0
- B 255.255.252.0
- C 255.255.0.0
- D. 255.255.254.0
Answer: D
NEW QUESTION 166
......
How much does the N10-007 exam cost?
The price of the N10-007 exam is $319 USD.
Reliable CompTIA Network+ N10-007 PDF Dumps Dec 12, 2021 Recently Updated Questions:https://www.dumpstillvalid.com/N10-007-prep4sure-review.html
FAQs
How many questions are on the N10 007? ›
The Network+ exam is 90-minutes long, and you could get a maximum of 90 questions on the exam. The passing score is 720, in a scale of 100 to 900.
How to pass the N+ exam? ›- Getting Familiar with Course Content. ...
- Review the Exam Objectives and Format. ...
- Book Your CompTIA A+ Exam. ...
- Exam Details and Specifics. ...
- Find Your Method of Studying. ...
- Build a Desktop Computer. ...
- Set Up Your CompTIA A+ Test Lab. ...
- Prepare for Performance-Based Questions.
You are graded on a scale from 100 to 900. The passing score on the CompTIA Network+ N10-007 exam is 720. In terms of percentages, this works out to a score of about 77%. This means that with a total of 90 questions on the exam you will need at least 70 correct answers to pass.
How to pass your N10-008 network exam? ›- CompTIA N10-008 Exam Structure and Objectives. ...
- Draft an Effective Study Plan. ...
- Allot Sufficient Time For Revision. ...
- Use Appropriate Study Resources. ...
- Take Breaks. ...
- Take CompTIA Network+ N10-008 Practice Tests. ...
- Engage in an Online Community.
You can take your second attempt any time after your first exam. However, for your third and subsequent attempts, you must wait at least 14 calendar days from the last try. Candidates must pay for each exam price attempt; CompTIA does not offer any free re-tests or discounts on retakes.
Does CompTIA Network+ N10-007 expire? ›Your CompTIA Network+ certification is good for three years from the day of your exam.
Is N10-008 harder than N10 007? ›Although the changes to the main objectives for N10-008 are not too earth-shattering, it remains that 20-25% of the content is new compared to N10-007. The pass rate at about 85% only leaves you an error margin of 15% on the exam.
Can I skip Network+ for Security+? ›Although there is no official prerequisite to take the Security+ exam, it is recommended that you take CompTIA's Network+ certification before moving to Security+. You must also have one to two years of IT experience. You need only take the SY0-601 exam to get certified.
Is Network+ easier than a+? ›CompTIA's Network+ training course and study material are less dense than A+. Network+ focuses mainly on networking knowledge, while A+ focuses on a wide variety of topics. This could be the reason why some people find the Network+ exam easier.
What is the pass rate for Network+ Plus? ›| Others | |
|---|---|
| Documented 95% passing rate. | (Most claim to have a high passing rate but can't prove it) |
| Over 1,000 practice questions. | (Most offer a few questions to practice) |
| Allows you to speak to the instructor before you start the class. | (You never meet the instructor until the class starts) |
Should I study for the Network+ 007 or 008? ›
Who Should Take the Network+ N10-007 Exam? If you are already studying for the N10-007, then there is no need to switch to the N10-008. It is always better to get a certification sooner rather than later. The one drawback is that the exam will be retired by June 2022.
How difficult is Network+ exam? ›We all can agree that the CompTIA Network+ certification exam is not easy. However, preparing well with the most authentic resources can help you pass the exam and get certified effortlessly. Therefore, to prepare extensively, take a training course from a reputed training center now.
Does N+ certification expire? ›Your CompTIA Network+ certification is good for three years from the date you pass your certification exam. Through our continuing education (CE) program, you can easily renew CompTIA Network+ and extend it for additional three-year periods.
Is Network+ for beginners? ›Networking certifications will pave your way to a better future in the industry, and the CompTIA Network+ certification is one of the most profound beginner networking certifications that can help you elevate your career as a network administrator.
How long should you study for the Network+ exam? ›Learn from the experts
While many respondents say they needed to study for several months, it's possible to pass the Network+ with only 6 weeks of preparation. Because the N10-008 is so similar to the N10-007, you should be able to study for — and pass! — the Network+ N10-008 in just 8 weeks.
What is the passing rate of the CompTIA A exam+? According to CompTIA A+ passing score, in percentage terms, this equates to around 72 percent in 1001 and nearly 75 percent in 1002.
How many times can I retake A+? ›How many times can you take the CompTIA A+ exam? Because there are no limits on the number of limits on the exam or the time between exams, you can retake the CompTIA A+ certification exam as many times as you like.
Are CompTIA exams hard? ›Is the CompTIA A+ Exam Hard? This is a subjective question. If you come from virtually zero IT experience, then yes, you may find preparing for the CompTIA A+ exam harder than some. But that's the great thing about CompTIA exam preparation: You pick your starting point and you pick your learning style.
Is Network+ higher than A+? ›The A+, Network+ and Security+ certifications are sequential. A+ focuses on devices; Network+ is dedicated to the hardware, software and protocols for networking; and Security+ adds the layer of core security functions across devices, networks, and the organizations that deploy them.
Is Network+ valuable? ›Your job title
Network+ certifications are designed to allow IT professionals to pursue better job positions by guaranteeing their IT expertise and knowledge. The Network+ certification is most valuable to a professional who is hoping to increase their job options or salary.
What is the hardest CompTIA exam? ›
i-Net+ is the easiest, Security+ is the hardest. Really depends on your level of experience. I was new to a lot of the Security concepts in teh Security+, but I had a lot of experience with the Network+. To me the Netowrk+ was far easier.
What is the difference between CompTIA Network+ N10 006 and N10 007? ›Key differences between N10-006 and N10-007 include the number of objectives covered, the technologies covered, changes in exam format and duration, and differences in difficulty level. N10-006 covers 5 domains with a total of 33 objectives, while N10-007 covers 6 domains with a total of 40 objectives.
When did N10 008 come out? ›The brand-new CompTIA Network+ (N10-008) launches on September 15, 2021.
Is Network+ enough for a job? ›A Network+ cert holder can qualify for numerous career paths, including the position of a network support specialist, help desk technician, system engineer, and similar.
Should I do Network+ before CCNA? ›CCNA, on the other hand, trains candidates to work with Cisco's tools and products exclusively. For the best career results, IT pros should first earn a vendor-neutral certification like CompTIA Network+ and later stack vendor-specific IT networking certifications onto it.
Is Network+ worth IT for cybersecurity? ›Based on this discussion, it is best to take the Network+ exam after obtaining hands-on experience and passing the Security+ exam. The Security+ exam is considered the entry path for all newcomers who want to pursue a career in the cybersecurity field.
How much can I make with a Network+ certification? ›| Job Title | Range | Average |
|---|---|---|
| Information Technology (IT) Director | Range:$68k - $148k | Average:$100,985 |
| Network Administrator | Range:$45k - $83k | Average:$62,440 |
| Cyber Security Analyst | Range:$55k - $114k | Average:$78,113 |
| Information Technology Specialist | Range:$40k - $88k | Average:$59,647 |
Both certifications have performance-based questions designed around IT job responsibilities. However, the CCNA certification is a newer exam and asks questions in formats unfamiliar to some test-takers, while Network+ uses a more traditional approach in the question design and evaluation.
Do I need a+ for cybersecurity? ›A+ is not required before or after Security+. Focus on Security+ and Network+ if you wish to work in the security area. Is Security+ sufficient to land you a job? Yes, CompTIA Security+ is sufficient for an entry-level position.
How many questions do you need to pass the Network+ exam? ›It's 90 questions long, features a mixture of performance-based and multiple-choice questions, and requires a passing score of at 720 out of a possible 900. As of February 2022, it costs $348 USD to take the Network+ exam.
How many questions are on Network+ N10 008? ›
Information about CompTIA Network+ N10-008 Exam
The N10-008 exam comprises 90 questions. The types of questions are multiple choices, single and multiple responses, and drag and drop.
Of the 200 questions you will be asked, 160 are counted for scoring in order to determine whether you achieve a passing grade, with the remaining 40 being unscored field-test items used for statistics to gauge whether they should be used on future versions of the NCE exam.
Is N10-008 harder than N10-007? ›Although the changes to the main objectives for N10-008 are not too earth-shattering, it remains that 20-25% of the content is new compared to N10-007. The pass rate at about 85% only leaves you an error margin of 15% on the exam.
Can you pass Network+ in a month? ›While many respondents say they needed to study for several months, it's possible to pass the Network+ with only 6 weeks of preparation. Because the N10-008 is so similar to the N10-007, you should be able to study for — and pass! — the Network+ N10-008 in just 8 weeks.
Is Network+ easier than A+? ›CompTIA's Network+ training course and study material are less dense than A+. Network+ focuses mainly on networking knowledge, while A+ focuses on a wide variety of topics. This could be the reason why some people find the Network+ exam easier.
What's the hardest certification exam? ›- UPSC (Union Public Service Commission) in India. ...
- Mensa. ...
- GRE (Graduate Record Examination) ...
- CFA (Chartered Financial Analyst) ...
- CCIE (Cisco Certified Internetwork Expert) ...
- GATE Exam (Graduate Aptitude Test in Engineering) ...
- USMLE Exam (United States Medical Licensing Examination) ...
- 10. California Bar Exam.
Top 10 Toughest Exams in World To Crack in 2022. Recent Update: IIT-JEE, UPSC CSE, and GATE are among the world's most difficult exams. In the ranking, the IIT JEE test is ranked first in India and second in the globe.
What percentage of people pass national board certification? ›The current certification rate for National Board Certification is 71%. This rate comprises over 20,700 educators who have achieved National Board Certification since 2017, out of over 29,000 candidates who have completed the assessment during that same period*.